Table of Contents
Advertisement
52
8.Functions Allotted to the Keypad
( 8-3
Attenuator Function
)
This function is used when the received signal is affected by other strong signals.
When the attenuator is set, the intensity of the targeted signal will be reduced but
other signals that affect the signal of your target will become weaker at the same
time. This will allow you to listen to the targeted signal more clearly. The
attenuation amount may be selected from 4 different levels, with
a
maximum
attenuation of 15dB.
Q.,,
1.Press the
~
key and
Iii
will
be lit on
the display.
(ii
ATT
223.500
FM
2.When the
1~:!1
key is pressed, [Attenuator]
A TT
wlll be displayed.
3
3.Rotate the upper dial and turn the attenuator off or select the intensity in a
range from 1 to 4.
The attenuation amount can be selected in the order from "1" (low) to "4" (high).
0
CAUTION
·The Attenuator function operates on both the main band and the sub
band.
( 8-4 Modulation Mode Setting
)
Although DJ-G29T has been programmed with appropreate modulation mode
according to the standard band-plans, the transmitting modulation mode can be
selected manually.
Q-.,
1.Tune to the frequency on MAIN band and press
Ql/.f8
key.
Iii
appears on
the display.
MPDs
2.Press
~
key. [Modulation mode] and current mode setting
will
be
Indicated. Rotate the upper dial and select a mode.
Available modes are NFM (narrow FM) and FM only.
Advertisement
Table of Contents
