Table of Contents
Advertisement
4.Names and Operations of Transceiver Controls
Name
Function
@ Earphone/
Connect the specified optional external earphone/
Microphone
microphone to the transceiver. When the terminals aren't
terminals
used, securely cover them to keep out water and dust.
@ Main TX/RX
The LED is green when the main side squelch is not
LED
muted. The LED is red when transmitting.
@ Sub RX LED
The LED is green when the sub side squelch is not muted.
®
Microphone
When transmitting, speak approximately 5 centimeters
from the microphone.
4-1-2 Sides
I
'
I /
1
0
\'
0
\
0
\
i
Name
Function
®
PTT key
Press the PTT key to transmit, release to receive.
®
MONI key
When the MONI key is pressed, the squelch mute function
(LAMP) key
is switched off. When
pressing the MONI key after
pressing the
~
key, illumination settings can be set.
®
Power switch
Press and hold the power switch down for approximately
one second to turn the unit on/off.
@ DC jack
This is the terminal for connecting an external DC power
supply. lt can be connected to adapters or used in mobile
operation with an optional cigar-lighter cable. The
transceiver can operate using a DC supply from 7.0 to 16 V
and a minimum current rating of 3
A.
27
Advertisement
Table of Contents
