Operation Modes; Operating The Transceiver In The Vfo Mode - Alinco DJ-G29T Instruction Manual

34
6.0peration Mode
6.0peration Mode
The DJ-G29T has 3 operation modes: the VFO, Program scan and Memory mode.
VFO mode VFO is the abbreviation of Variable Frequency Oscillator. This
mode allows choosing the frequency by rotating the dial.
Program scan This mode is for tuning in selected channels within a set scan
mode range. You must first register date in the program scan bank in
order to perform the following operations. (P.40)
Memory mode The Memory mode recalls frequencies registered previously.
Please read "Memory Mode (P.39)" to practice memory
registration.
·Switching the operation mode
Every time the
IJjJ}
key is pressed, the modes switch in the order shown in the
illustration.
VFO mode
(Program scan mode)""----i• ...
11\' t .!C
fifj}
Memory mode
[ 6-1 Operating the Transceiver in the VFO Mode)
This is the mode that is active when the transceiver is turned on after being
shipped from the factory. Frequencies can be selected by rotating the dials.
•Switching Bands
A •
A band can be chosen by pressing the
fiiil
key or the
fiffJ
key.