Table of Contents
Advertisement
D
86
10.Set Mode
( 10-7 RECEIVER
J
The settings of certain reception parameters are explained in this section.
1.Select "RECEIVER" from the Set mode menu.
2.By pressing the dial, the sub menu will appear.
10-7-1 Clock Noise Shift Settings
If a faint noise is always heard in a particular frequency, there is a possibility that
it is due to processor clock noise. Clock noise cannot be eliminated due to the
design of circuits in the unit, but this transceiver allows to move the noise to a
different frequency making reception of the desired signal possible.
1.Rotate the upper dial and select "Clk
noise shift".
"Clk noise shift'' will be displayed as shown
on the right.
!il
" I i i )
223.500
Clk noise shift
OFF
'
"
2.Rotate the lower dial and select between "ON"<->"OFF".
•
MEMO
·This feature is different from the noise blanker function. Please be
aware that not all noises are due to clock noise, and therefore
using the clock noise shift function may not always be effective.
Advertisement
Table of Contents
