Programmable Parameters In Memory Channels; Call-Channel Mode - Alinco DJ-V17TFH Instruction Manual

4.Basic Operation

4.5.5 Programmable Parameters in Memory Channels

The following parameters can be stored in each of the memory channels.
• Frequency
• Offset frequency *
• Shift direction (+/-) *
• Tone encoder frequency *
• Tone decoder frequency *
• Tone encoder/decoder setting (TSQ) *
• DCS code *
• DCS setting *
• Skip channel setting
• Busy channel lockout (BCLO)
4
• Transmission power (H/L)
• Battery save setting
• Clock Shift setting
• Alphanumeric channel tag
• Attenata Level
NOTE:
Only parameters marked "*" are programmable in Repeater-Access function memory.
4.6

Call-Channel Mode

This mode is used to recall a most frequently used memory channel (stored in MC
channel) with a single key-touch.
1. Press the
" " is displayed on the LCD, and the channel
programmed in MC is recalled.
2. Press the
Call mode to return to original operating mode
(VFO/memory).
28
key.
key again or the key in the