Set Tag Channels - Alinco DJ-MX1 Instruction Manual

• • BASIC OPERATIONS BASIC OPERATIONS
■ Priority Scan
A priority scan sequentially searches through all TAG channels
while monitoring channel 16. When a signal is detected on Channel
16, the scan pauses until the signal disappears, when a signal is
detected on a channel other than Channel 16, the scan switches to
Dual-watch, until the signal disappears.

Set TAG Channels

Edit the TAG (favorite or frequently used) channels as below. Channels that are not tagged will be
skipped during scanning.
■ Single TAG channel
1. Press [CH] to select desired channel group.
2. Press [Y]/[Z] key to select the desired channel to be set as a TAG Channel.
3. Press and hold [FAV/TAG] for 1.5 seconds, to set the displayed channel as a TAG Channel.
• "TAG" icon will appear in the function display.
4. Repeat above operation to cancel the TAG channel setting,
• "TAG" icon will disappear.
■ All TAG channels
Hold [FAV/TAG] key and Power On the radio to clear all TAG channels in the selected channel
group.
Repeat above operation to set all channels as TAG channels.
This function is not available in weather channel group.
20
Marine Transceiver