Administer And Enable The Ip Server Interface - Avaya S8700 Installing

Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Fill in the appropriate carrier types for each media gateway.
2
add cabinet 1
CABINET DESCRIPTION
Cabinet: 1
Cabinet Layout: five-carrier
Cabinet Type: expansion-portnetwork
Number of Portnetworks: 1
Survivable Remote EPN? n
Location: 1
Cabinet Holdover: A-carrier-only
CARRIER DESCRIPTION
Carrier Carrier Type
C not-used
B port
A expansion-control
X Fan
D not-used
E switch-node

Administer and enable the IP Server Interface

NOTE:
Do this procedure only if the translations were not input earlier.
The following administration uses the services laptop computer connected to the active media
server and uses a terminal emulation application.
NOTE:
This procedure enables the IPSI circuit packs and allows them to control the port
networks.
Type change system-parameters ipserver-interface and press
1
change system-parameters ipserver-interface
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
SERVER INFORMATION
IPSI Host Name Prefix: vodka
Primary Control Subnet Address: 198.152.254.
Secondary Control Subnet Address: 198.152.255.
OPTIONS
IPSI Control of Port Networks: enabled
Verify that the Primary and Secondary Subnet Addresses are correct.
2
CABINET
Room: Floor:
Number
PN 01
PN 01
PN 01
PN 01
SN 01
Switch Identifier: A
May 2003
Customize the Active Media Server
Building:
Duplicate
03E
.
Enter
Page
0 *
0 *
57
1 of 1