Set Locations (If Necessary) - Avaya S8700 Installing

Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
NOTE:
The default daylight savings rule is 0, meaning no daylight savings transition.
Type change daylight-savings-rules and press
1
change daylight-savings-rules
Rule Change Day
0: No Daylight Savings
1: Start: first Sunday
Stop: first Sunday
2: Start: first
Stop: first
3: Start: first
Stop: first
4: Start: first
Stop: first
5: Start: first
Stop: first
6: Start: first
Stop: first
7: Start: first
Stop: first
Type the appropriate Start and Stop information in the Change Day, Month, Date,
2
Time, and Increment fields for each rule. For example, 1:00 in the Increment
field means to move the clock forward or back by one hour at the transition point.
NOTE:
You can change any rule except rule 0 (zero). You cannot delete a daylight savings rule if
it is in use on either the Locations or Date and Time screens.
When done, press
3

Set locations (if necessary)

The following administration is done on a computer used to access the active media server
using a terminal emulation application.
DAYLIGHT SAVINGS RULES
Month
on or after April
on or after October
on or after
on or after
on or after
on or after
on or after
on or after
on or after
on or after
on or after
on or after
on or after
on or after
to effect the changes.
Enter
May 2003
Completing the Installation Administration
.
Enter
Page 1 of
Date Time Increment
1 at 02:00 01:00
25 at 02:00
at : :
at :
at : :
at :
at : :
at :
at : :
at :
at : :
at :
at : :
at :
273
2