Avaya S8700 Installing page 50

50 Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Configure the SNMP Modules in the UPSs
Connect the services laptop computer (RS-232 serial port) to the DB-9 connector on the
2
back of the SNMP module for UPS 1 using the DB-9 to DB-9 serial cable supplied with
the SNMP module.
NOTE:
Avaya™ Terminal Emulation and HyperTerminal are supported terminal emulation
applications. Terranova is not supported.
On the services laptop open a VT-100 terminal emulation session using an application
3
such as Avaya Terminal Emulation.
4 Administer the terminal emulation port settings:
Follow the instructions in User's Guide.
5
6 Set the following parameters:
NOTE:
If a Network Management System (NMS) is going to monitor the UPS units, coordinate
the assignment of community names with the network administrator (refer to the filled out
job aid titled Pre-Installation Network Planning Forms—S8700 Media Server). If an NMS
is not going to monitor the UPSs, set the community names to unique string values.
SECURITY ALERT
The Get and Set, community name strings are generally configured with default values of
Public and Private, respectively. These community name strings function as passwords for
their respective SNMP operation. It is always a good idea to change these community name
strings to something other than the default values. If a Network Management Station is in
operation on the network, whatever these values are changed to must be coordinated with its
9600 baud
•
• No parity
8 data bits
•
• 1 stop bit
• No flow control
IP address and subnet mask of the UPS
•
• For UPS1 the defaults are 198.152.254.239, 255.255.255.0.
• For UPS2 the defaults are 198.152.255.239, 255.255.255.0.
IP address of the trap receiver. (Do not use the Active Server IP address.)
•
• For UPS1, this is the IP address of media server 1. (default is
198.152.254.200)
For UPS2, this is the IP address of media server 2. (default is
•
198.152.255.200)
Default Gateway address of the UPS is 198.152.254.201.
•
SNMP community string for Get, Set, and Trap.
•
May 2003