Add Ipsi Translations To Communication Manager - Avaya S8700 Installing

58 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Customize the Active Media Server
The subnet addresses must match the most significant 3 octets (the first 3 groups of digits
in the subnet address) of the Server IP address filled in on the control network entry from
the filled-out job aid entitled Pre-Installation Network Planning Forms—S8700 Media
Server.
An Asterisk (*) to the right of the Subnet Address field means that although a subnet
address is displayed, it is not the correct one; the Communication Manager call
processing software does not have the subnet information. After verifying the displayed
information, submit this form with or without changes to update the Communication
Manager with the correct subnet information.
!
CAUTION:
If the information displayed in the Primary and/or Secondary Subnet Address fields is not
correct, it must be changed on the media servers. Use the Maintenance Web Interface;
under Server Configuration and Upgrades, click Configure Server to change the media
server configuration. Then return here to perform this step.
Set the Switch Identifier: field to the switch ID letter (A thru J; A is the default
3
setting).
Set the IPSI Control of Port Networks: field to enabled.
4
5 Press

Add IPSI translations to Communication Manager

NOTE:
The information you provide differs, depending on whether the IPSIs get static addresses
or they are assigned automatically through DHCP.
Type add ipserver-interface PNnumber and press
1
information.
to effect the change.
Enter
May 2003
to add the IPSI circuit pack
Enter