Connect Battery Cabinet; Connect Optional Battery Leads - Avaya S8700 Installing

112 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway

Connect Battery Cabinet

!
CAUTION:
Power is present in the media gateway even if the AC power cable is unplugged. Turn off
the main circuit breaker on the front of the media gateway when procedures require ALL
power to be removed from the media gateway.
Connect the DC Battery cabinet to the DC Power cabinet.
''DC Battery to DC Power cabinet Connections'' on page 112
connections from the DC Battery cabinet to the DC Power cabinet.
DC Battery to DC Power cabinet Connections
Figure notes
DC Power cabinet
1
Connect Red DC Power Cable to -48
2
VDC Return Bus
Connect Black DC Power Cable to -48
3
VDC Bus

Connect Optional Battery Leads

To prevent the internal batteries from discharging, the Control media gateway is shipped with
the battery leads disconnected.
Set the circuit breakers OFF. See
1
— Right Side'' on page
Connect the battery leads. The battery is near the top of the carrier toward the front-right.
2
The battery leads are located next to the battery and are accessible from the front of the
media gateway.
Inset Applies to -48 VDC Buses and -48
4
VDC Return Buses
5 Battery cabinet
DC Power Cables (Red and Black)
6
''Expansion Control Media Gateway Battery Location
113.
May 2003
shows how to make typical
pwrdist5 RBP 052896