Using Static Addressing - Avaya S8700 Installing

Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
All segments of the display will go dark for one second and then the Switch ID and
6
Cabinet number will be displayed in the top three characters of the LED display. A 'V'
will be shown in the fourth character (bottom) of the display. When an address has been
assigned to the IPSI by the DHCP server, the center of the 'V' will be filled in to form the
bottom half of a diamond in the display.
7 For high or critical reliability configuration, repeat steps 1 through 6 for the IPSI in
carrier B.
8 Press excess ribbon against the circuit packs.

Using static addressing

For the IPSI circuit packs to get static IP addresses, you must administer them directly through
the Ethernet port connection on the IPSI faceplate (top port). See
IPSI'' on page 204.
CLK
S
E
R
V
May 2003
Connecting to the IPSIs
''Connecting directly to the
203