Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Push the tabs on the ends of the connector inward to lock the connector in place. Refer to
4
''Ribbon Cable Connector'' on page
Ribbon Cable Connector
Thread the ribbon through the slot on the front panel.
5
Attach the other end of the short ribbon cable to the bottom connector on the component
6
side of the TN775D maintenance circuit pack (red line on the bottom). See
Reliability Ribbon Cable Connection'' on page
195.
196.
May 2003
195
Connecting to the IPSIs
''Duplex