Avaya S8700 Installing page 204

204 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Connecting to the IPSIs
Connecting directly to the IPSI
Figure notes
1
2
Connect the services laptop computer to the top port on the IPSI circuit pack faceplate.
1
2 From the services laptop Start Menu, click Start > Run to open the Run dialog box.
Type command and press
3
4 Type arp -d 192.11.13.6 and press
command will respond with one of the following:
5 Type telnet 192.11.13.6 and press
IPSI.
Prompt = [IPSI]:
NOTE:
While connected to the IPSI type help or ? to obtain online help. Most commands have
two or three letter abbreviations.
Type ipsilogin and press
6
1
cadlipsi KLC 031502
Services laptop
PCMCIA Network Interface Card (NIC)
The command line prompt when the cache has been cleared.
•
• The phrase: The specified entry was not found. This is returned when the
specified IP address does not currently contain an entry in the ARP cache.
Enter
2
3
3
4
to open a MSDOS Command Line window.
Enter
to clear the ARP cache in the laptop. This
Enter
to open the Telnet window and connect to the
Enter
. (abbreviated command = il)
May 2003
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
4
NIC adapter cable (if necessary)
CAT5 crossover cable to IPSI