Avaya S8700 Installing page 110

110 Installing the Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Connections Using DC Power Distribution Unit
Figure notes
1
2
3
4
5
6
7
Media Gateway Stack
DC Power Cabinet
DC Power Distribution Unit (position
to right of the media gateway stack
White Wire (connect to Circuit
Breaker). See inset.
Green Ground Wires and Black Wire
(connect to the -48 VDC Return Bus)
-48 VDC Bus
Inset12 in. (30.5 cm) from floor to DC
Power Distribution Unit
DC Power Cable to Power
8
Connector on Each Media Gateway.
DC Power Distribution Unit Power
9
Cord (route to rear of DC Power
Cabinet)
10 Route Power Cord Through Sliding
Door
Circuit Breaker
11
12 Supplied #10-32 Screw, #10 Star
Washer, and #10-32 Hex Nut
13 Inset Showing DC Power Connector
(Male)
May 2003