Check Spe; Disable Tti; Save Translations To Disk Drive (Pre-Upgrade) - Avaya DEFINITY Server R Manual

Phase 1 Hardware Replacement
If you get the following message with any of the above commands:
Error encountered, can't complete request
follow the normal escalation procedure for translation corruption before continuing
the upgrade.

Check SPE

1. Type status spe and press
For high or critical reliability systems:
If the fields display anything other than the above, see Chapter 4,
"Initialization and Recovery" in the maintenance book. Do not continue with
the upgrade until you have resolved all errors.

Disable TTI

NOTE:
Do this step only if Terminal Translation Initialization (TTI) is enabled.
1. Type change system-parameters features and press
2. On the second screen, set the Terminal Translation
Initialization (TTI) Enabled? field to n to de-activate the TTI
feature. If it is already set to n, cancel the command and skip step 3.
3. Type status tti and press
4. Repeat Step 3 until the TTI Background Task State field is
completed.
!
CAUTION:
If you do not disable the TTI, the translations can be corrupted.

Save Translations to Disk Drive (pre-upgrade)

1. Type save translation and press
from memory to the disk drive, which takes about 2 minutes.
555-233-115
Enter
The Standby Refreshed field shows yes
The Standby Shadowing field shows on
The Standby Handshake field shows up
Enter
to check the health of the SPE.
.
to write all translation information
Enter
Issue 5 October 2002
Enter.
2-21