Table of Contents
Advertisement
Running the File System Check
June 2002
3. Print the screens using one of the following methods:
— For a 4410, 4425, or 610 terminal:
1. Press CONTROL-F4 to display the screen-labeled
print keys.
2. Press F3 (Print Screen) to print the screen.
3. Press CONTROL-F6 to return the screen-labeled
keys to their original state.
— For a 715 terminal:
1. Press the PRINT-SCRN key to print the screen.
— For a 513 terminal:
1. Press F10 to display the first layer of screen-labeled
keys for the terminal.
2. Press F1 to display the screen-labeled print keys.
3. Press F7 (Print Screen) to print the screen.
4. Press F10 and F5 to return the screen-labeled keys to
their original state.
5. Repeat Step 2 and Step 3 to print each screen.
6. Continue with Running the File System Check (page 7).
The Multimedia Messaging Implementation Support group (MMIS) must
run a file system check on the DEFINITY AUDIX system before the
migration continues. This check eliminates any potential corruption in the
subscriber database and improves the success rate of this type of
migration.
After you contact them, the MMIS engineers dial in to the DEFINITY
AUDIX system remotely and run the check. You then can continue with
the next three switch-related tasks and with installing the migration
software on the INTUITY AUDIX system while the check is running.
After the check is complete, you can continue with the DEFINITY
AUDIX tasks.
585-313-118 Issue 4
Migrating from DEFINITY AUDIX
7
Advertisement
Table of Contents
