Avaya DEFINITY Server R Manual page 434

Adding or Removing Cabinet Hardware
5. If you are self-downloading to a TN2501AP (VAL) circuit pack, reseat the
pack:
!
!
a. Release the latch handle to free the circuit pack from the carrier.
b. Pull the circuit pack out approximately 1 – 2 inches (~ 3 – 5 cm).
c. Re-insert the circuit pack into the carrier.
d. Close the latch securely.
Aborting a firmware download
If you need to abort a scheduled (pending) firmware download:
1. Enter disable firmware download.
This command:
Remote download
This procedure allows you to update up to 50 target circuit packs of the same type
using a new firmware image file distributed from a source TN799C/DP C-LAN
circuit pack. This procedure can update these target circuit packs:
2-Wire Digital Line (TN2214CP or TN2224CP)
IP Media Processor (TN2302AP)
Maintenance/Test (TN771DP)
UDS1 (TN464GP, TN2464BP, and TN2313AP)
NOTE:
If you have any trouble with this procedure, refer to
firmware downloads'' on page
7-18
Issue 5 October 2002
WARNING:
To prevent electrostatic discharge (ESD), be sure to wear a
grounding strap while handling the circuit pack.
CAUTION:
Ensure that both the top green and top amber LEDs are out.
Continues to download the firmware image file to circuit pack in
progress
Aborts the remainder of the download schedule
Clears the contents of the Firmware Download screen
''Troubleshooting
7-25.
(Screen 7-4)
555-233-115