Remove The Present System; Check Spe - Avaya DEFINITY Server R Manual

Upgrading G3vs to an Avaya DEFINITY Server R
running Avaya MultiVantage Software
2. Mail the translation card to Software Technical Support (STS) (with
next-day delivery).
3. Insert the original translation card back into the present system.
NOTE:
It is important that you do not add any new translations while the spare
translation card is being converted. If not possible, be sure to keep detailed
records of any translation changes made during that interval. These records
facilitate the reassignment of any changes on the removable media after the
upgrade.
Follow Routine Preventive Maintenance
During the upgrade, follow routine preventive maintenance procedures on the
system to be upgraded. For information about the procedures and necessary
equipment, refer to the "Preventive Maintenance" section in Maintenance for
Avaya MultiVantage DEFINITY Server R.

Remove the Present System

NOTE:
If the equipment room is large enough to allow the MCC1 cabinet to be
installed while the present system is in service, skip to
Cabinets'' on page
If the present system must be removed to make room for the new MCC1 cabinet,
perform the following procedure.

Check SPE

1. Type status spe and press
3-10
Issue 5 October 2002
3-14. Return to this section when finished.
to check the health of the SPE.
Enter
''Install the MCC1
555-233-115