Table of Contents
Advertisement
3. In the left pane, in the System Settings section, to the right of General Setting,
4. In the right pane, in the Ring Duration section, click Edit.
5. From the AWU list, select the required number of seconds.
6. From the RMN list, select the required number of seconds.
7. Click Update to save the changes.
8. Restart HMS 400 for the changes to take effect.
Variable Definitions
AWU list
RMN list
Configuring default check in language
About this task
When a customer checks into the hotel, the hotel PMS normally configures the preferred
language for that customer. If the preferred language information is not provided, the HMS 400
system uses the Default Check In Language that you configure in the following procedure.
Procedure
1. On the Web Configuration main navigation bar, click System Configuration.
2. In the System Configuration navigation, in the System Settings section, click Pg
3. In the Default Check In Language section, click Edit.
4. In the Language list, select the default language.
Avaya Hospitality Messaging Server 400 Installation and Commissioning
click Pg 1.
OR
Click Cancel to discard the changes.
Variable
1 beside General Setting.
Only installed languages are available.
Configuring default check in language
Value
Select the number of seconds for an
automatic wake up call to ring before the
system considers the call unanswered.
Select the number of seconds for remote
notification call to ring before the system
considers the call unanswered.
March 2012
73
Advertisement
Table of Contents
