Task Table - Avaya DEFINITY Server R Manual

Task Table

Usable circuit packs
Every circuit pack used in the system must conform to the minimum usable
vintage requirements for that system. Replace all unusable vintage circuit packs
with current vintages. For information about usable vintages of non-U.S. circuit
packs, refer to the ITAC Tech Alert from your regional distributor.
Survivable Remote EPNs
Check if Survivable Remote EPNs are installed and accessible. The upgrade
outage can place the SREPNs into survive mode. After the upgrade, you need to
switch them back to normal mode.
Wireless Systems
If the system uses Wireless Business System, you need to re-enable the radio
controllers after the upgrade. Refer to Chapter 1, "UTAM Disablement" in the
Avaya MultiVantage Wireless Business System Maintenance book. Refer also to
Chapter 2, "Switch Administration" in Avaya MultiVantage Wireless Business
System Installation and Test.
NOTE:
This activity can only be performed with the init login.
Customer Requirements
If the system has a TN750B or earlier announcement circuit pack, customers are
required to back up the announcements before the upgrade. The Avaya field
technician will not do this.
G3r only allows the contents of one integrated announcement board to be saved
to its storage media. Backing up multiple announcement boards requires multiple
removable media. Integrated announcement boards require administered data
modules to successfully save announcements to storage media.
Task Table
Table 1-1 lists the high-level tasks to perform the upgrades. Refer to the
appropriate page for instructions for each step.
The upgrade procedure is similar for Standard, High, or Critical Reliability systems
with a few exceptions, which are noted in the applicable steps.
555-233-115 Issue 5 October 2002
1-3