Add Isdn-Bri - Avaya DEFINITY Server R Manual

Adding or Removing Cabinet Hardware
Enter Added Translations
1. Get the DOSS order number of the upgrade. Call the regional CSA to
perform the steps in this section.
2. To enable DCS, set the DCS field on the System Parameters-Customer
Options form to y.
3. Administer the other required translation data using the forms listed under
Distributed Communications System (DCS) in Administration for Network
Connectivity for Avaya MultiVantage Software.
Save Translations
1. Type save translation and press
from memory to the system disk, which takes about 2 minutes.
Add ISDN—BRI
Add Circuit Packs
1. Determine port assignment of circuit packs to be added.
2. Install the appropriate circuit packs in assigned cabinet slot (as required).
EXAMPLE:
Install Cables
1. Install cables from cabinet to the MDF as required.
Enter Added Translations
1. Administer the required translation data using the forms listed under 7500D
voice terminals and 8500 voice terminals in Administrator's Guide for
Avaya MultiVantage Software.
7-54
Issue 5 October 2002
3 A
Cabinet (Port Carrier
Network)
NOTE:
BRI requires a 12-port backplane cable terminator (breakout
connector). Connect this terminator to the 25-pair cable. This is
different from the 8-port connector used for DCP.
to write all translation information
Enter
07 01
Slot Port
Number Number
555-233-115