Release Mmi (High/Critical Reliability Only); Check For Translation Corruption; Check Link Status; Check Isdn Signaling Group States - Avaya DEFINITY Server R Manual

Phase 2 Hardware Addition/Replacement

Release MMI (High/Critical reliability only)

1. Type release board cabinet carrier slot and press
circuit packs, which were busied out earlier.

Check for Translation Corruption

1. Type newterm and press
following message:
Warning: Translation corruption detected
follow the normal escalation procedure for translation corruption before continuing
the upgrade.
2. If R5r or earlier, execute the following commands and note the status:
If you get the following message with any of the above commands:
Error encountered, can't complete request
follow the normal escalation procedure for translation corruption before
continuing the upgrade.

Check Link Status

1. Type display communication-interface links and press
with the earlier status. See
2. Type status link number and press

Check ISDN Signaling Group States

1. Type list signaling-group and press
2. Type status signaling-group and press
service. If it is not, follow normal maintenance procedures.

Enable Scheduled Maintenance

1. Type change system-parameters maintenance and press
2. Type the appropriate time in the Start field to enable scheduled daily
maintenance. Make sure the Save Translation field is set to daily.
555-233-115
Enter
list station
list trunk-group
list hunt-group
list data-module
list integrated announcements (if any boards installed)
''Display Alarms'' on page
. If you do not get a login prompt and see the
. Repeat this step for each link.
Enter
.
Enter
to determine if ISDN is in
Enter
Issue 5 October 2002
to release the
Enter
. Compare it
Enter
2-19.
.
Enter
2-43