Save Translations; Save Announcements; Back Up Disk; Check Isdn Signaling Group States - Avaya DEFINITY Server R Manual

Upgrading G3vs to an Avaya DEFINITY Server R
running Avaya MultiVantage Software
3. Type status tti and press
4. Repeat Step 3 until the TTI Background Task State field is
completed.

Save Translations

1. Type save translation and press
from memory to the translation card.
2. Check for translation errors before proceeding with the upgrade. If errors
are detected, refer to
''Troubleshooting an Upgrade''
the upgrade until the errors are corrected.

Save Announcements

NOTE:
The TN750C and TN2501AP Integrated Announcement circuit packs store
announcements in nonvolatile memory; saving the announcements is
optional.
1. If the PPN contains a TN750B Announcement circuit pack, type display
announcements and press
2. If administered recorded announcements are listed, type save
announcements cabinet carrier slot and press
01D03. This takes about 30 minutes.
3. Remove the translation card and install the backup translation card

Back Up Disk

1. Type backup disk and press
the backup tape. This takes 30 to 40 minutes.

Check ISDN Signaling Group States

1. Type list signaling-group and press
2. Type status signaling-group and press
service. If it is not, follow normal maintenance procedures.
3-12
Issue 5 October 2002
Enter
''No Translations after upgrade''
NOTE:
For some software loads, type save announcements from cabinet
carrier slot. Type help and press
usage.
.
to write all translation information
Enter
to correct the problem. Do not continue with
.
Enter
Enter
for complete command
Enter
to write all information from the disk to
Enter
.
Enter
to determine if ISDN is in
Enter
in Appendix B,
. For example,
555-233-115