Add Multiple Integrated Announcement Circuit Packs - Avaya DEFINITY Server R Manual

Adding or Removing Cabinet Hardware
Add Multiple Integrated
Announcement
Circuit Packs
Systems with multiple announcement circuit packs have the following types:
TN750/B announcement
TN750C integrated announcement
TN2501AP integrated announcement
Customers upgrading from older circuit packs to Release 10 can mix multiple
circuit pack types according to the system limits (see
circuit packs).
TN2501AP
The TN2501AP, a new integrated announcement circuit pack
offers up to 1 hour of announcement storage capacity.
requires shorter backup and restore times.
is firmware downloadable.
plays announcements over the TDM bus, similar to the TN750C.
has 33 ports, including
— 1 dedicated telephone port for recording and playing back
— 1 ethernet port (port number 33).
— 31 playback ports (ports 2–32).
10/100 Mb ethernet interface, allowing announcement and firmware file
portability over your LAN (FTP server functions).
supports .wav announcement files (see
Important File Specifications
Voice Announcement over LAN (VAL) requires that announcement files are in the
following .wav formats:
CCITT A-Law or CCITT µ-Law companding format (do not use PCM)
8KHz sample rate
8-bit resolution (bits per sample)
Mono (channels = 1)
You must convert other wave ( .wav) file formats to those listed above. Telephone
access creates the correct file formats.
7-36
Issue 5 October 2002
announcements (port number 1).
Number of announcement
Important File Specifications).
555-233-115