560 Appendix F Moving Voice Gateway Media Cards between systems
7
8
9
10
11
12
13
Use
Release 4.0 or earlier (Leader or Follower)" (page 560)
Media Card 32-port card running CS 1000 Release 4.0 or earlier on a
system running CS 1000 Release 4.5 or later, where the card was a Leader
or a Follower in the original system.
Procedure 85
Reconfiguring the Media Cards running CS 1000 Release 4.0 or earlier
(Leader or Follower)
Step
1
2
3
Copyright © 2003–2008, Nortel Networks
.
Every node must have a Leader. To set the Leader flag for the
Media Card, enter
BIOS>nvramLeaderSet
To reboot the Media Card, enter
->sysReboot
Use Element Manager to select this Voice Gateway Media Card.
For more information about adding Voice Gateway Media Cards
using Element Manager, see
using Element Manager" (page
ClickTransfer to Selected Elements to transfer the config.ini and
bootp.tab files to the card.
See
"Transmit node properties" (page
The account information is synchronized with the Call Server.
Logon to the card using the current user name and password.
At IPL> prompt, enter
cardReset
Use standard procedures to upgrade Voice Gateway Media Card
8051XA Controller firmware and the software, if necessary.
Procedure 85 "Reconfiguring the Media Cards running CS 1000
Action
Press the reset button on the Media Card 32-port card faceplate.
Access the card by the EIA232 Maintenance port.
At the prompt, to escape to BIOS VxWorks, enter
jkl
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
"Configuration of IP Telephony nodes
273).
304).
—End—
to reconfigure the