Corporate Directory - Avaya Nortel Communication Server 1000 Manual

134 Features
Figure 37
vgwShow with IP address command output
When the IP address is found in the list of VGW channels for a card
other than the card where the command was entered, the VGW channel
information for the first occurrence is returned, plus a count of the number of
times the IP address occurs in that card list. Multiple instances can occur
when the customer network is configured so that multiple IP Phones are
behind a NAT device sharing the NAT device public IP address.
If there is more than one match, the administrator can log into that specific
card and enter the vgwShow command without entering an IP address and
port number. That will print all the busy channels on the card. To quickly
find a particular IP Phone, use the IPDN or DNIP commands in LD 117
to obtain the IP Phone media stream public IP address and port number;
then enter the public IP address and port number as parameters for the
vgwShow command.

Corporate Directory

The Corporate Directory feature is based on the M3900 telephone
Corporate Directory feature.
The Corporate Directory database is created using TM 3.1 and is generated
from one of the following:
•
•
The database is downloaded and stored on the Call Server. It is then
accessible to the IP Phones. The Signaling Server can support Corporate
Directory access for the same number of IP Phones that are registered.
The Directory key on the IP Phone is used to access the directory, select a
listing, and then dial a number from the Corporate Directory. The Navigation
keys are used to refine the search within the Corporate Directory.
Copyright © 2003–2008, Nortel Networks
.
the configured DN information from the Call Server
the data from a corporate LDAP server
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008