Procedure 34 Transmitting Node Properties To Leader - Avaya Nortel Communication Server 1000 Manual

304 Configuration of IP Telephony nodes using Element Manager
7
8
9
10
11
12
Transmit node properties
To transmit the node properties to the Leader, follow the steps in
34 "Transmitting node properties to Leader" (page
Procedure 34
Transmitting node properties to Leader
Step
1
2
Copyright © 2003–2008, Nortel Networks
.
Reboot the Leader Voice Gateway Media Card.
At the IPL> or oam> prompt, enter: cardReset, or press the Reset
button on the faceplate of the Leader Voice Gateway Media Card.
WARNING
Do not use a pencil to reset the Voice Gateway Media
Card. The graphite carbon can create an electrical short
circuit on the board.
Check the maintenance display for T:22 to confirm a successful
reboot.
Log into Element Manager.
In the Element Manager navigator, click IP Network > Nodes:
Servers, Media Cards.
The Node Configuration window appears.
Click Transfer/Status to check the status of the Voice Gateway
Media Card.
The Transfer/Status window is displayed.
If the card role is not correct, verify LAN connections and IP
configuration.
Action
If changes are made to the node or card configuration data, ensure
the data is saved to the Call Server by clicking the Save and
Transfer button in the Edit window.
A confirmation dialog box opens.
Click OK to confirm the save of the node data.
The Edit window closes, and the Node Configuration window
appears.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
—End—
304).
Procedure