Procedure 24 Adding An Ip Telephony Node Manually - Avaya Nortel Communication Server 1000 Manual

280 Configuration of IP Telephony nodes using Element Manager
6.
7.
8.
9.
Manually add an IP Telephony node
Follow the steps in
(page 280)
Procedure 24
Adding an IP Telephony node manually
Step
1
Copyright © 2003–2008, Nortel Networks
.
"Configure file server access" (page 295)
"Configure loss and level plan" (page 296)
"Add card and configure the card properties of the Voice Gateway Media
Card" (page 298)
"Submit and transfer the node information" (page 299)
Procedure 24 "Adding an IP Telephony node manually"
to add an IP Telephony node using Element Manager.
Action
To manually add a new IP Telephony node, click IP Network >
Node: Servers, Media Cards in the navigator.
The Node Configuration window appears. See
a new node" (page
Figure 61
Adding a new node
If this is the first node to be added, the "No nodes are configured"
message is displayed. There are two options: "New Node to Add"
or "Import Node Files".
The Node Configuration window shows a list of all the configured
nodes. To expand a node and view its elements, click the plus sign
(+) to the left of the Node name.
The Node Configuration window includes five buttons:
• to Add – used to add a new IP Telephony node. Enter an unused
Node ID and then click to Add.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
280).
Figure 61 "Adding