Procedure 52 Deleting The Leader Voice Gateway Media Card - Avaya Nortel Communication Server 1000 Manual

If the Leader card for a second or subsequent node (that is, the card in
Element Manager that displays the card role as Leader) is deleted, then
another card in the node must be selected and the setLeader command
must be issued on that card. A node must have a Leader card for it to
operate correctly when the node is powered up.
The role of a card can be viewed in Element Manager; however, it cannot
be changed there. Element Manager displays the card role based on the
setLeader status of the card.
Follow the steps in the
Media Card" (page 399)
the current Leader Voice Gateway Media Card.
Procedure 52
Deleting the Leader Voice Gateway Media Card
Step
1
2
3
4
5
6
7
8
9
10
11
12
Copyright © 2003–2008, Nortel Networks
.
Procedure 52 "Deleting the Leader Voice Gateway
to first select a new Leader card and then to delete
Action
In the Element Manager navigator, click IP Network > Maintenance
and Reports.
The Node Maintenance and Reports window appears.
Expand the node containing the Voice Gateway Media Card that
becomes the new Leader by clicking the plus sign (+) to the left of
the Node ID.
Select a card in the node to become the new Leader.
Click the Virtual Terminal button to the right of the card and log
into the card.
Enter the setLeader command.
The card becomes the new Leader.
Remove the "old" Leader card from the Media Gateway.
Reboot the new Leader card.
Wait for the card to come up as the Leader.
Click IP Network > Nodes: Servers, Media cards.
On the Node Configuration window, click Edit for the node.
In the Edit window, click the Remove button for the "old" Leader
card that was removed.
Click OK to confirm the deletion of the card.
Click Save and Transfer.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Update IP Telephony node properties 399