Ld 117 Stat Serv - Avaya Nortel Communication Server 1000 Manual

146 Features

LD 117 STAT SERV

The suite of STAT SERV (Statistic Services) commands enables a technician
to display link-status information for Signaling Servers and Voice Gateway
Media Cards that are registered to a Call Server.
STAT SERV can provide consolidated link-status information by application
type, IP address, host name, and IP Telephony Node ID.
STAT SERV status information includes the following:
•
•
•
•
•
•
•
•
•
•
The Signaling Server resource count aids in determining the number of
virtual trunks that can be configured.
pbxLink information
The STAT SERV command provides the following pbxLink information:
•
•
•
•
Application information
If an active link to an element is established, the Call Server obtains
information about the applications running on the element.
Table 32 "Queried information in STAT SERV" (page 147)
applications and describes the information provided by those applications.
Copyright © 2003–2008, Nortel Networks
.
node ID
host name
ELAN IP address
element role
platform type
connection ID
enabled applications
registered/unregistered endpoints, such as IP Phones and Voice
Gateway Media Cards.
information about the pbxLink and enabled applications
Signaling Server resource count
the time the pbxLink was last established
the time the pbxLink was lost, if previously established
the time the pbxLink last attempted to establish a connection, if the
pbxLink failed to establish
the Signaling Server resource count
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
lists the