Avaya Nortel Communication Server 1000 Manual page 264

264 Installation and initial configuration of an IP Telephony node
Prompt Response
PAGEOFST <Page>
<KeyOffset>
KEY xx
Copyright © 2003–2008, Nortel Networks
.
Description
The cccc or D entry deals specifically with the Calling Line
Identification feature, where:
cccc = CLID table entry of (0)-N, where N = the value
entered at the SIZE prompt in LD 15 minus 1. You can
enter a CLID table entry if aaa = ACD, HOT d, HOT L,
MCN, MCR, PVN, PVR, SCN, or SCR.
D = the character "D". When the character "D" is entered,
the system searches the DN keys from key 0 and up, to
find a DN key with a CLID table entry. The CLID associated
with the found DN key will then be used.
The position of the (cccc or D) field varies depending on
the key name or function.
Automatically calculates the IP Phone KEM key based
on the entered values. This prompt enables the system
administrator to enter a Page number of 0 or 1 and a Key
Offset number from 0 to 23. Once entered, the KEY prompt
is prompted with the appropriate KEY value filled in.
Enter <CR> to terminate data entry.
Applies to an IP Phone 2004 with KEM = 1, and where
<CR> was entered at the KEY prompt. This does not apply
to an IP Phone 2002.
When values are entered for Page and KeyOffset, the KEY
xx prompt displays, followed by PAGEOFST prompt. This
loop continues until no values (<CR> only) are entered at
the PAGEOFST prompt.
Edit the IP Phone KEM key number specified by
PAGEOFST, where:
xx = the number of the key (for example, KEY 36)
Enter <CR> to keep the current setting.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008