Avaya Nortel Communication Server 1000 Manual page 337

When you configure and enable password protection, the IP Phone
displays the Node ID and password. The Password entry input field is
blank (underscores are not displayed). Therefore, the maximum length of
the password is not disclosed. If you enter the correct password, the TN
displays. See
(page
Figure 80
IP Phone registration with password checking
IP Line CLI commands for password control
The IP Phone Installer Passwords are configured on any Voice Gateway
Media Card in the node. The IP Phone Installer Password is configured and
administered using a set of six IPL> CLI or oam> commands:
•
•
•
•
•
•
The commands begin with node as they work at the node level. For detailed
information about these commands, see
Password commands" (page
Copyright © 2003–2008, Nortel Networks
.
Figure 80 "IP Phone registration with password checking"
337).
nodePwdSet "password"
nodePwdShow
nodeTempPwdSet "temppwd", uses, <time>
nodeTempPwdClear
nodePwdEnable
nodePwdDisable
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Table 135 "IP Phone Installer
466).
Password security 337