Avaya Nortel Communication Server 1000 Manual page 453

In LD 32, any command affecting a phantom loop leads to an NTP665
message because the loop does not physically exist. LD 32 supports STAT,
DISU, ENLU, and IDU commands on an IP Phone Virtual TN. All other
commands generate the NPR047 message.
Maintenance commands for the IP Phone
Table 127 "LD 32 maintenance commands for IP Phones" (page
453)
For more information about commands, see Software Input Output
Reference—Maintenance (NN43001-711).
Table 127
LD 32 maintenance commands for IP Phones
Command
STAT l s c u
DISU l s c u
ENLU l s c u
IDU l s c u
STAT VTRK <cust#>
<route#> <start_mb#>
<number of members>
IDU command
Because the system must request the information from the IP Phone, the
IDU is effectively a PING command and can be used to test the end-to-end
IP connectivity of the IP Phone.
Copyright © 2003–2008, Nortel Networks
.
IP Line and IP Phone maintenance and diagnostics 453
contains the maintenance commands in LD 32 for the IP Phone.
Description
Display the IP Phone state.
UNEQ, IDLE, BUSY, and DSBL have the usual meaning.
IDLE and DSBL state are precise by the following information:
• UNREGISTERED identifies an IP Phone that is configured in the
system but has not yet registered.
• REGISTERED identifies an IP Phone that has registered.
Change the IP Phone state to DSBL.
UNREGISTERED/REGISTERED state is not modified.
Change the IP Phone state to IDLE.
UNREGISTERED/REGISTERED state is not modified.
Displays selected IP Phone information.
Displays the TN number, MAC address, device code, NT code,
color code, release code, software code, serial number, IP Phone IP
address, and LTPS IP address.
Displays the status of the virtual trunks for a customer route starting
from a specified starting member for the number of members
specified.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008