Avaya Nortel Communication Server 1000 Manual page 465

Table 133
Upgrade commands
Command
umsPolicyShow
umsUpgradeAll
umsUpgradeTimerShow
umsUpgradeTimerCancel
firmwareFileGet
firmwareFilePut
uftpTurboMode
uftpTurboModeShow
uftpTurboModeTimeoutSet
IPL shell commands
Table 134 "IPL shell command" (page 465)
IPL> shell password.
Table 134
IPL shell command
IPL> command
shellPasswordSet
IP Phone Installer Password commands
Table 135 "IP Phone Installer Password commands" (page 466)
Phone Installer Password commands.
Copyright © 2003–2008, Nortel Networks
.
Description
Displays the current upgrade policy.
This command does not appear on the
MC 32S card.
Upgrades all registered IP Phones
according to policy and firmware file.
This command does not appear on the
MC 32S card.
Shows the upgrade schedule.
This command does not appear on the
MC 32S card.
Cancels the scheduled upgrade.
This command does not appear on the
MC 32S card.
Uploads new firmware to the Signaling
Server
Downloads F/W file to the specified FTP
server.
Used in conjunction with RST FW
and RST Zone commands to initiate
and obtain the status of the firmware
downloads Maintenance Mode.
Description
Changes the current user name and password of the
IPL> CLI shell.
This command does not appear on the MC 32S card.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
IP Line CLI commands 465
Signaling
Server
X
X
X
X
X
X
X
X
X
lists the command to change the
Signaling
Server
lists the IP