Media Card 32S - Avaya Nortel Communication Server 1000 Manual

Ip line fundamentals
Hide thumbs Also See for Nortel Communication Server 1000:
Table of Contents

Advertisement

36 Description

Media Card 32S

The Media Card 32S card (NTDW65AA) provides the following features:
Secure Real-time Transport Protocol
The Media Card 32S card uses Secure Real-time Transport Protocol
(SRTP) to secure the IP media path between the card and the Nortel
Phase II IP Phones, IP Phone 1110, IP Phone 1120E, IP Phone 1140E, IP
Phone 1150E, IP Phone 1210, IP Phone 1220, IP Phone 1230, another
Media Card 32S card, or a DSP daughterboard. When Media Security is
configured to On, the Call Server sends a message to the Voice Gateway
software on the Media Card 32S card to activate SRTP for the media
connection established for that call.
Media Security is configured by the system administrator.
For information about SRTP, see IP Phones Fundamentals (NN43001-368)
and System Management Reference (NN43001-600).
Processors Two separate processors on the MC 32S card are known
as the Control and Signaling Processor (CSP) and the Media Stream
Processor (MSP). The CSP runs application and signaling code, whereas
the MSP processes the media streams.
Table 7 "Files downloaded to the MC 32S card" (page 36)
names and paths for files that are downloaded from the Signaling Server
to the MC 32S card.
Table 7
Files downloaded to the MC 32S card
File name
IPL5.00XX.mc32s
bootp.tab
config.ini
The software for the MC 32S consists of five files, which are located in
the IPL5.00XX.mc32s zipped file stored on the Signaling Server. All Gold
versions of firmware are loaded on the MC 32S when the card is shipped
from the factory. The Gold Boot Code, the upgradeable Boot Code, the
Gold MSP Image, the Gold VxWorks Kernel for CSP Image, the Gold App
Image, and the upgradeable Field-programmable Gate Array (FPGA) image
Copyright © 2003–2008, Nortel Networks
.
Secure Real-time Transport Protocol (SRTP)
two Digital Signal Processors (DSP), based on an ARM processor
channel density of 32 ports
Path on Signaling
Server
/u/fw
/u/config
/u/config
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Path on MC 32S card
/pl
/u/config
/u/config
lists the file
Description
Software binaries
bootp parameter file
config file

Advertisement

Table of Contents
loading

Table of Contents