Procedure 74 Importing All Converted Voice Gateway Media Cards Into A New Ip Telephony Node - Avaya Nortel Communication Server 1000 Manual

520 Convert IP Trunk Cards to Voice Gateway Media Cards
Import all converted Voice Gateway Media Cards into a new IP Telephony
node
Follow the steps in
Media Cards into a new IP Telephony node" (page 520)
newly-converted Voice Gateway Media Cards into a new IP Telephony node
using Element Manager.
Procedure 74
Importing all converted Voice Gateway Media Cards into a new IP Telephony
node
Step
1
2
3
Copyright © 2003–2008, Nortel Networks
.
b. In the Element Manager navigator, click IP Network > Nodes:
Servers, Media Cards .
The Node Configuration window appears.
1. Expand the desired node by clicking the plus sign (+) to the
left of the Node ID.
2. Click VGW CHANNELS next to the appropriate Voice
Gateway Media Card.
The VGW Channels window appears.
3. Click Add.
if an Alert Box appears, log into the CLI of the Call Server.
Use LD 22 to determine if Package 167 is enabled or
restricted by entering 167 as a response to the TYPE prompt.
If Package 167 is restricted, obtain a new keycode to enable
GPRI Package 167.
In LD 73, enter DDB at the TYPE prompt and press <CR>
through the overlay, accepting all the defaults.
Procedure 74 "Importing all converted Voice Gateway
Action
Log into Element Manager from the Web browser by entering the IP
address of the Signaling Server.
Enter the User ID and password (usually the same as the Call
Server User ID and password).
When logged into Element Manager, click IP Network > Nodes:
Servers, Media Cards .
The Node Configuration window appears.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
—End—
to import all