Import Node Configuration From An Existing Node - Avaya Nortel Communication Server 1000 Manual

320 Configuration of IP Telephony nodes using Element Manager
Import node configuration from an existing node
It is possible to import a node and its configuration data from an existing
node into Element Manager.
For example, if Node 151 exists, but does not exist on the Call Server, then
Node 151 can be imported into Element Manager. Once imported, the node
configuration data can be updated and edited.
Procedure 41
Importing node files
Step
1
2
3
4
Copyright © 2003–2008, Nortel Networks
.
Action
In the Element Manager navigator, click IP Network > Nodes:
Servers, Media Cards.
The Node Configuration window appears.
Click Import Node Files.
The Import Node Files window appears. See
Node Files window" (page
Figure 76
Import Node Files window
Enter the Embedded LAN (ELAN) network interface IP address of
the Leader card in the text box. This address is used to retrieve
the node files.
Click the Import button.
If the node already exists on the Call Server, a message appears
indicating that the node already exists on the Call Server.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Figure 76 "Import
320).