Nn43100-500 02.02 Standard Release 5.5 4 February - Avaya Nortel Communication Server 1000 Manual

4
5
6
Command
->lnIsa_writeIP
->lnIsa_writeSubnetMask
->lnIsa_writeGW
7
8
9
10
Copyright © 2003–2008, Nortel Networks
.
To change the ELAN IP address configuration, the IP Telephony
application Leader flag, and the IPL> logon parameters in NVRAM,
enter
->nvramClear
The card becomes a Follower; the Leader flag is cleared and the IP
telephony parameters are reset to the default values of the logon
account.
To set the flag so ELAN IP address configuration data is read from
the NVRAM instead of a BootP query, enter
->lnIsaIPMethodSet 2
At the prompt, enter
Every node must have a Leader. To set the Leader flag for the Media
Card 32-port card, enter
->nvramLeaderSet
At the prompt, to remove the configuration files and backups, enter
->cd C/:/config
->rm config.ini
->rm config.bak
->rm bootp.tab
->rm bootp.bak
To restart the Media Card, enter
-> sysReboot
After the sysReboot command is executed, the Media Card restarts
and the following default user name and password is available for
CS 1000 Release 4.0 and lower:itgadmin, itgadmin
Use Element Manager to select this Voice Gateway Media Card.
For more information about adding Voice Gateway Media Cards
using Element Manager, see
using Element Manager" (page
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Reconfiguring the Voice Gateway Media Card 561
Description
ELAN IP Address
ELAN subnet mask
ELAN Gateway IP address
"Configuration of IP Telephony nodes
273).