Backup And Restore Data - Avaya Nortel Communication Server 1000 Manual

Backup and restore data

All data is stored on the Call Server. Element Manager accesses the data
for the elements being maintained. Element Manager does not store data.
There is no Element Manager-specific data that needs to be backed up. All
data is retrieved from the Call Server and elements.
The c:/u/db/node directory is populated on the Call Server when the node
configuration is saved. The BOOTP.TAB and CONFIG.INI files are saved in
this directory as c:/u/db/node/nodexxxx.btp and c:/u/db/node/nodexxxx.cfg
where xxxx is the node ID:
•
•
Copyright © 2003–2008, Nortel Networks
.
Figure 86
Syslog window
From the Syslog File to View drop-down list, select LATEST to view
the most current syslog information that was written to the Voice
Gateway Media Card and click View
Alternatively, click the Latest button. As well, SYSLOG.0,
SYSLOG.1, SYSLOG.2, and SYSLOG.3 can be selected from the
drop-down list and viewed by clicking View. Alternatively, click the
SYSLOG.0, SYSLOG.1, SYSLOG.2, or SYSLOG.3 button to view
the associated syslog file.The syslog file data is displayed in the
window below the buttons. The data can be error messages or
information messages. For each message, the date, timestamp, and
the task that is printing the message is displayed.
nodexxxx.btp is the BOOTP.TAB file
nodexxxx.cfg is the CONFIG.INI.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Backup and restore data 387
—End—