Avaya Nortel Communication Server 1000 Manual page 266

266 Installation and initial configuration of an IP Telephony node
KEY
PAGEOFST
KEY <key>
KEMOFST
KEY <key>
Copyright © 2003–2008, Nortel Networks
.
0 - <see text>/ <CR>
<Page>
<KeyOff-set>
<CR>
<keys conf data>
<KEM>
<Key-Off-set>/
<CR>
<keys conf data>
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Key number range expanded to support
number of Expansion Modules specified by
KEM prompt. The range on the IP Phone
is as follows:
xx = key number
For IP Phone 1120E, where:
xx = 0 to 31 when KEM = 0
xx = 0 to 49 when KEM = 1
xx = 0 to 67 when KEM = 2
xx = 0 to 85 when KEM = 3
For IP Phone 1140E and IP Phone 1150E,
where:
xx = 0 to 31 when KEM = 0
xx = 0 to 67 when KEM = 1
xx = 0 to 67 when KEM = 2
xx = 0 to 85 when KEM = 3
You are prompted for PAGEOFST if an
IP Phone 1140E or an IP Phone 1150
is attached, if one Expansion Module is
specified at the KEM prompt, and if <CR>
is entered at the KEY prompt. This prompt
enables you to enter a Page number of 0, or
1, and a Key Offset number from 0 to 17.
Once entered, the KEY is prompted with the
appropriate KEY value filled in. <CR> ends
the input.
<key> is the key number for the Page + Key
Offset entered at PAGEOFST. Enter the
key's configuration <CR> or just <CR>.
You are prompted for KEMOFST if an IP
Phone 1120E is attached and if one, two,
or three Expansion Modules are specified
at the KEM prompt, and if <CR> is entered
for KEY prompt.
This prompt enables you to enter a KEM
number of 1, 2, or 3 and a KEY Offset
number from 0 to 17. Once entered, the KEY
prompt is prompted with the appropriate
KEY value filled in. <CR> ends the input.
<key> is the key number for the KEM + Key
Offset entered at KEYOFST. Enter the key's
configuration <CR> or just <CR>.