Procedure 7 Configuring The Ip Phone Application Server On A Separate Signaling Server - Avaya Nortel Communication Server 1000 Manual

Data field name
Remote backup file name
Remote backup userid
Remote backup password
The Personal Directory, Callers List, and Redial List features are not
available to the user if the IP Phones lose contact with the Signaling Server.
The IP Phones then register with the Voice Gateway Media Card but the
features only become available again when contact with the Signaling
Server is reestablished.
In a node composed of Voice Gateway Media Cards and Signaling Server,
IP Phones only register to the Voice Gateway Media Cards when the
Signaling Server are not present due to a failure condition. Five minutes
after a node election is completed, each Voice Gateway Media Card with IP
Phones registered to it checks to see if a Signaling Server is present in the
node. If a Signaling Server is present, any idle IP Phones that are found
are reset (server-switched) back to S1 (Server 1) so they can re-register to
the Signaling Server. If an IP Phone is busy, a one-minute timer is started.
Every one minute, the process comes back to check for idle IP Phones and
idle phones are reset. This checking continues until no IP Phones remain
registered to the Voice Gateway Media Cards.
Configure IP Phone Application Server on a separate Signaling Server
If the IP Phone Application Server must support more than 1000 users,
follow the steps in
Server on a separate Signaling Server" (page 207)
Phone Application Server on a separate Signaling Server.
Procedure 7
Configuring the IP Phone Application Server on a separate Signaling Server
Step
1
2
3
Copyright © 2003–2008, Nortel Networks
.
IP Phone Application Server configuration and administration 207
Example
ipldb.db
etherset
etherset
Procedure 7 "Configuring the IP Phone Application
Action
In the Element Manager navigator, click IP Network > Nodes:
Servers, Media Cards to configure a new node.
The Node Configuration window appears.
Enter a unique Node ID in the New Node field. Click the to Add
button.
The Edit window appears.
Configure the IP addresses and subnet masks for the Signaling
Server.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Description
file name of the backup file
logon name for the remote
backup
password for remote backup
to configure the IP