Supplying A Password For Multipoint Calls; About Multipoint Viewing Modes - Polycom HDX Room Systems User Manual

Supplying a Password for Multipoint Calls

About Multipoint Viewing Modes

Polycom, Inc.
Hosts of multipoint calls sometimes require you to enter a password in order
to join a conference. If your system administrator has allowed access to user
settings, you can set up the system to enter the meeting password for you.
Contact your system administrator for more information.
To configure a meeting password:
Select System from the Home screen.
1
Select User Settings from the System screen.
2
Enter the password in the Meeting Password field in one of these ways:
3
— Press the remote control number buttons, using the text-entry method
commonly used with cell phones.
— Press Keyboard to use the onscreen keyboard to enter
characters.
Press Home to save your change and return to the Home screen.
4
If you need to generate touch tones (DTMF tones), press
control, or press
number buttons.
What you see during a multipoint call can vary depending on how the
Polycom HDX system is configured, the number of sites participating, the
number of monitors you are using, and whether content is shared. The
multipoint viewing mode configured on the host system is the one used in the
call. To find out more about these modes, please talk to the administrator of
your Polycom HDX system. The following table describes the different
multipoint viewing modes.
User's Guide for Polycom HDX Room Systems
and choose Touch Tones. Then use the remote control
on the remote
31