Configuring Telephony - Polycom HDX Series Administrator's Manual

Configuring Telephony

To configure telephony options:
1. Go to System > Admin Settings > Network > Telephony.
2. Configure these settings on the Telephony screen:
Setting
Room Telephone
Number
System Telephone
Number
Outside Line
Dialing Prefix
To configure the analog phone line (POTS line):
1. Go to System > Admin Settings > Network > Telephony.
Enter the System Telephone Number for the analog phone line.
2. Go to System > Admin Settings > Network > Call Preference.
Enable Analog Phone.
3. Go to System > Admin Settings > Network > Call Preference >
Add Analog Phone to the Audio Dialing Order on the Network Dialing
screen.
Description
Enter the telephone number of the room where the system
is located.
Specifies the analog phone number of the system, including
country and area codes for the system's location.
Specifies the dialing prefix used to call outside the network.
Networks
.
2 - 23