Polycom Microphone Lights; Connecting Non-Polycom Microphones Or A Mixer To A Polycom Hdx System - Polycom HDX Series Administrator's Manual

Polycom Microphone Lights

Connecting Non-Polycom Microphones or a Mixer to a Polycom HDX System

The following illustrations show microphone placement for different room
layouts.
Long Table
Wide Table
After you place the microphones, you will need to configure the system to
send stereo as described in
The following table describes the behavior of the microphone lights.
Microphone Light
Off
Green
Red
Amber
You can connect up to two microphones directly to the Polycom HDX system,
or you can connect several microphones to the Polycom HDX system through
an audio mixer. Refer to your system's setup sheet for connection details.
Connecting a Polycom Vortex® mixer to Polycom HDX systems provides
flexibility in audio setup. For example, it allows you to provide a microphone
for each call participant in a boardroom. For top performance, you need Vortex
firmware 2.5.3 or later and Conference Composer™ version 3.0.1 or later.
For more information about connecting non-Polycom microphones, refer to
Settings for Non-Polycom Microphones
One Microphone Two Microphones
StereoSurround Settings
Status
Not in a call
In a call, mute off
Mute on
Firmware upload
on page 4-10.
Microphones and Speakers
on page 4-8.
4 - 3