Show Ipv6 Dhcp; Show Ipv6 Dhcp Binding - Planet SGS-6341 Series Command Manual

Global Mode.
Usage Guide:
The DHCPv6 services include DHCPv6 server function, DHCPv6 relay function, DHCPv6 prefix
delegation function. All of the above services are configured on ports. Only when DHCPv6 server
function is enabled, the IP address assignment of DHCPv6 client, DHCPv6 relay and DHCPv6
prefix delegation functions enabled can be configured on ports.
Examp:
To enable DHCPv6 server.
Switch(config)#service dhcpv6

27.24 show ipv6 dhcp

Command:
show ipv6 dhcp
Function:
To show the enable switch and DUID of DHCPv6 service.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
To show the enable switch and DUID of DHCPv6 service, this command only can support the DUID
type of DUID-LLT. The DUID types are the same not only displayed but also required in client and
server identifier options.
Example:
Switch#show ipv6 dhcp
DHCPv6 is enabled
LLT DUID is <00:01:00:01:43:b7:1b:81:00:03:0f:01:5f:9d>
LL DUID is <00:03:00:01:00:03:0f:01:5f:9d>

27.25 show ipv6 dhcp binding

Command:
show ipv6 dhcp binding [<ipv6-address>| pd <ipv6-prefix|prefix-length>|count]
Function:
To show all the address and prefix binding information of DHCPv6.
Parameter:
27-56