Chapter 12 Vlan Configuration; Commands For Vlan Configuration; Debug Gvrp Event; Debug Gvrp Packet - Planet SGS-6341 Series Command Manual

Chapter 12 VLAN Configuration

12.1 Commands for VLAN Configuration

12.1.1 debug gvrp event

Command:
debug gvrp event interface (ethernet | port-channel |) IFNAME
no debug gvrp event interface (ethernet | port-channel |) IFNAME
Function:
Enable/disable GVRP event debugging including the transfer of state machine and the expiration of
timer.
Parameter:
ethernet, physical port
port-channel, aggregate port
IFNAME, port name
Command mode:
Admin Mode.
Default:
GVRP event debugging is disabled.
Usage Guide:
Use this command to enable GVRP event debugging.
Example:
Show GVRP event debugging.
Switch(config)#debug gvrp event interface ethernet 1/0/1
%Jan 16 02:25:14 2006 GVRP EVENT: LO -> VO ，interface ethernet 1/0/1, vlan 100
%Jan 16 02:35:15 2006 GVRP EVENT: join timer expire，interface ethernet 1/0/1

12.1.2 debug gvrp packet

Command:
debug gvrp packet (receive | send) interface (ethernet | port-channel |) IFNAME
no debug gvrp packet (receive | send) interface (ethernet | port-channel |) IFNAME
Function:
Enable/disable GVRP packet debugging.
12-46