Show Ip Ospf Database - Planet SGS-6341 Series Command Manual

Number of LSA received 0
Number of areas attached to this router: 1
Area 0 (BACKBONE) (Inactive)
Number of interfaces in this area is 0(0)
Number of fully adjacent neighbors in this area is 0
Area has no authentication
SPF algorithm executed 0 times
Number of LSA 0. Checksum Sum 0x000000
35.55 show ip ospf border-routers
Command:
show ip ospf [<process-id>] border-routers
Function:
Display the intra-domain route entries for the switch to reach ABR and ASBR of all instances.
Parameter:
<process-id> is the process ID, ranging between 0~65535.
Default:
Not displayed
Command Mode:
Admin and configuration mode
Example:
Switch#show ip ospf border-routers
OSPF process 0 internal Routing Table
Codes: i - Intra-area route, I - Inter-area route
i 10.15.0.1 [10] via 10.10.0.1, Vlan1, ASBR, Area 0.0.0.0
i 172.16.10.1 [10] via 10.10.11.50, Vlan2, ABR, ASBR, Area 0.0.0.0

35.56 show ip ospf database

Command:
show ip ospf [<process-id>] database[{ adv-router [{<linkstate_id>| self-originate |adv-router
<advertiser_router>}]sbr-summary[{<linkstate_id>| self-originate |adv-router
<advertiser_router>}] | externel [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]|
network [{<linkstate_id>| self-originate |adv-router <advertiser_router>}]nssa-external
35-222