Show Ip Dvmrp Interface - Planet SGS-6341 Series Command Manual

Usage Guide:
The command applies to display some total statistic information of DVMRP protocol
Example:
Switch#show ip dvmrp
DVMRP Daemon Start Time: MON JAN 01 00:00:09 2001
DVMRP Daemon Uptime: 17:37:03
DVMRP Number of Route Entries: 2
DVMRP Number of Reachable Route Entries: 2
DVMRP Number of Prune Entries: 1
DVMRP Route Report Timer: Running
DVMRP Route Report Timer Last Update: 00:00:56
DVMRP Route Report Timer Next Update: 00:00:04
DVMRP Flash Route Update Timer: Not Running

44.7.9 show ip dvmrp interface

Command:
show ip dvmrp interface [<ifname>]
Function:
Display DVMRP interface
Parameter:
<ifname> is interface name, namely displaying configured interface information of specified
interface.
Default:
Do not display (Off)
Command Mode:
Any Configuration Mode
Example:
Example:
Switch #show ip dvmrp in vlan4
Address
13.1.1.3
10.1.35.3
Displayed Information
Address
Interface Vif Ver.
Index
Vlan1 1 v3.ff 0
Vlan2 0 v3.ff 0
44-81
Nbr Type Remote
Cnt Address
BCAST N/A
BCAST N/ASwitch #
Explanations
Address