Match Community; Match Interface - Planet SGS-6341 Series Command Manual

Switch(config-route-map)#match as-path 60

31.5 match community

Command:
match community <community-list-name | community-list-num> [exact-match]
no match community [<community-list-name | community-list-num> [exact-match]]
Function:
Configure the community attributes of BGP routing messages. The "no match community
[<community-list-name | community-list-num > [exact-match]]" command deletes this
configuration.
Parameter:
<community-list-name > is the name of the community-list, <community-list-num > is the
community-list sequence number, ranging between 1～99 (Standard ACL) or 100～199 (Extended
ACL), [exact-match] means precise matching.
Command Mode:
route-map mode
Usage Guide:
This command matches the community attributes of the BGP routing message following the rules
specified in the community list. If the matching succeeded, then the "permit" or "deny" action in the
route-map is performed.
Example:
Switch#config terminal
Switch(config)#route-map r1 permit 5
Switch(config-route-map)#match community 100 exact-match

31.6 match interface

Command:
match interface <interface-name >
no match interface [<interface-name >]
Function:
Configure to match the interfaces. The "no match interface [<interface-name >]"deletes this
configuration.
31-115